模具术语词汇列表
| 1 | 两辨 | 2-flute |
|
| 2 | 困气 | air entrapment |
|
| 3 | 空气隔绝层 | air gap insulation |
|
| 4 | 空气隔离层 | air seal |
|
| 5 | 两点画弧 | arc endpoints |
|
| 6 | 料筒加热能力 | barrel heating capacity |
|
| 7 | 码板 | clamp plate |
|
| 8 | 冷轧圆钢 | cold rolled steel |
|
| 9 | 昆氏曲面 | coons surface |
|
| 10 | 锣刀 | end-mill |
|
| 11 | 流道开关配件 | gate shut-offs |
|
| 12 | 拉铃孔 | handling hole |
|
| 13 | 孔深量测仪 | hole gauge |
|
| 14 | 快速拉杆锁定装置 | jiffy latch lock assemblies |
|
| 15 | 快速连接喉 | Jiffymatic connector |
|
| 16 | 码模夹(注塑机使用) | mould clamps;lifting clamps |
|
| 17 | 垃圾位 | overflow |
|
| 18 | 快插水路接头 | quick disconnect fitting,quick connection adaptor |
|
| 19 | 快速断开接头 | quick disconnector |
|
| 20 | 流道板(或冷或热) | runner plate |
|
| 21 | 流道分流锥 | runner spreader |
|
| 22 | 码板 | safety strap |
|
| 23 | 螺丝孔,螺丝基座 | screw boss |
|
| 24 | 螺杆长度/直径比例 | screw L/D ratio |
|
| 25 | 螺杆力矩 | screw torque |
|
| 26 | 螺旋式的连接喉 | spiral hose |
|
| 27 | 螺旋形的;盘旋的 | spiral hose |
|
| 28 | 拉流杆;扣针 | sprue puller |
|
| 29 | 扣针导套 | sprue puller insert |
|
| 30 | 扣针镶件 | sprue puller insert |
|
| 31 | 拉杆;水口边 | support pin |
|
| 32 | 拉杆定位;水口边定位介子 | support pin collar |
|
| 33 | 理论的注射容量 | theoretical shot volume |
|
| 34 | 料位过薄/砸穿 | thin wall stock |
|
| 35 | 螺纹型环 | thread ring;threaded cavity |
|
| 36 | 快速夹 | toggle clamp |
|
| 37 | 困气 | venting |
|
| 38 | 立式铣刀,立辊,立辊轧机 | vertical miller |
|
| 39 | 料位厚薄 | wall stock |
|
| 40 | 冷却水流量计 | waterflow regulator |
|
生词本打印版
| 1 | 2-flute | 两辨 | |
| 2 | air entrapment | 困气 | |
| 3 | air gap insulation | 空气隔绝层 | |
| 4 | air seal | 空气隔离层 | |
| 5 | arc endpoints | 两点画弧 | |
| 6 | barrel heating capacity | 料筒加热能力 | |
| 7 | clamp plate | 码板 | |
| 8 | cold rolled steel | 冷轧圆钢 | |
| 9 | coons surface | 昆氏曲面 | |
| 10 | end-mill | 锣刀 | |
| 11 | gate shut-offs | 流道开关配件 | |
| 12 | handling hole | 拉铃孔 | |
| 13 | hole gauge | 孔深量测仪 | |
| 14 | jiffy latch lock assemblies | 快速拉杆锁定装置 | |
| 15 | Jiffymatic connector | 快速连接喉 | |
| 16 | mould clamps;lifting clamps | 码模夹(注塑机使用) | |
| 17 | overflow | 垃圾位 | |
| 18 | quick disconnect fitting,quick connection adaptor | 快插水路接头 | |
| 19 | quick disconnector | 快速断开接头 | |
| 20 | runner plate | 流道板(或冷或热) | |
| 21 | runner spreader | 流道分流锥 | |
| 22 | safety strap | 码板 | |
| 23 | screw boss | 螺丝孔,螺丝基座 | |
| 24 | screw L/D ratio | 螺杆长度/直径比例 | |
| 25 | screw torque | 螺杆力矩 | |
| 26 | spiral hose | 螺旋式的连接喉 | |
| 27 | spiral hose | 螺旋形的;盘旋的 | |
| 28 | sprue puller | 拉流杆;扣针 | |
| 29 | sprue puller insert | 扣针导套 | |
| 30 | sprue puller insert | 扣针镶件 | |
| 31 | support pin | 拉杆;水口边 | |
| 32 | support pin collar | 拉杆定位;水口边定位介子 | |
| 33 | theoretical shot volume | 理论的注射容量 | |
| 34 | thin wall stock | 料位过薄/砸穿 | |
| 35 | thread ring;threaded cavity | 螺纹型环 | |
| 36 | toggle clamp | 快速夹 | |
| 37 | venting | 困气 | |
| 38 | vertical miller | 立式铣刀,立辊,立辊轧机 | |
| 39 | wall stock | 料位厚薄 | |
| 40 | waterflow regulator | 冷却水流量计 |
