1 | 两辨 | 2-flute |
|
2 | 困气 | air entrapment |
|
3 | 空气隔绝层 | air gap insulation |
|
4 | 空气隔离层 | air seal |
|
5 | 两点画弧 | arc endpoints |
|
6 | 料筒加热能力 | barrel heating capacity |
|
7 | 码板 | clamp plate |
|
8 | 冷轧圆钢 | cold rolled steel |
|
9 | 昆氏曲面 | coons surface |
|
10 | 锣刀 | end-mill |
|
11 | 流道开关配件 | gate shut-offs |
|
12 | 拉铃孔 | handling hole |
|
13 | 孔深量测仪 | hole gauge |
|
14 | 快速拉杆锁定装置 | jiffy latch lock assemblies |
|
15 | 快速连接喉 | Jiffymatic connector |
|
16 | 码模夹(注塑机使用) | mould clamps;lifting clamps |
|
17 | 垃圾位 | overflow |
|
18 | 快插水路接头 | quick disconnect fitting,quick connection adaptor |
|
19 | 快速断开接头 | quick disconnector |
|
20 | 流道板(或冷或热) | runner plate |
|
21 | 流道分流锥 | runner spreader |
|
22 | 码板 | safety strap |
|
23 | 螺丝孔,螺丝基座 | screw boss |
|
24 | 螺杆长度/直径比例 | screw L/D ratio |
|
25 | 螺杆力矩 | screw torque |
|
26 | 螺旋式的连接喉 | spiral hose |
|
27 | 螺旋形的;盘旋的 | spiral hose |
|
28 | 拉流杆;扣针 | sprue puller |
|
29 | 扣针导套 | sprue puller insert |
|
30 | 扣针镶件 | sprue puller insert |
|
31 | 拉杆;水口边 | support pin |
|
32 | 拉杆定位;水口边定位介子 | support pin collar |
|
33 | 理论的注射容量 | theoretical shot volume |
|
34 | 料位过薄/砸穿 | thin wall stock |
|
35 | 螺纹型环 | thread ring;threaded cavity |
|
36 | 快速夹 | toggle clamp |
|
37 | 困气 | venting |
|
38 | 立式铣刀,立辊,立辊轧机 | vertical miller |
|
39 | 料位厚薄 | wall stock |
|
40 | 冷却水流量计 | waterflow regulator |
|
1 | 2-flute | 两辨 | |
2 | air entrapment | 困气 | |
3 | air gap insulation | 空气隔绝层 | |
4 | air seal | 空气隔离层 | |
5 | arc endpoints | 两点画弧 | |
6 | barrel heating capacity | 料筒加热能力 | |
7 | clamp plate | 码板 | |
8 | cold rolled steel | 冷轧圆钢 | |
9 | coons surface | 昆氏曲面 | |
10 | end-mill | 锣刀 | |
11 | gate shut-offs | 流道开关配件 | |
12 | handling hole | 拉铃孔 | |
13 | hole gauge | 孔深量测仪 | |
14 | jiffy latch lock assemblies | 快速拉杆锁定装置 | |
15 | Jiffymatic connector | 快速连接喉 | |
16 | mould clamps;lifting clamps | 码模夹(注塑机使用) | |
17 | overflow | 垃圾位 | |
18 | quick disconnect fitting,quick connection adaptor | 快插水路接头 | |
19 | quick disconnector | 快速断开接头 | |
20 | runner plate | 流道板(或冷或热) | |
21 | runner spreader | 流道分流锥 | |
22 | safety strap | 码板 | |
23 | screw boss | 螺丝孔,螺丝基座 | |
24 | screw L/D ratio | 螺杆长度/直径比例 | |
25 | screw torque | 螺杆力矩 | |
26 | spiral hose | 螺旋式的连接喉 | |
27 | spiral hose | 螺旋形的;盘旋的 | |
28 | sprue puller | 拉流杆;扣针 | |
29 | sprue puller insert | 扣针导套 | |
30 | sprue puller insert | 扣针镶件 | |
31 | support pin | 拉杆;水口边 | |
32 | support pin collar | 拉杆定位;水口边定位介子 | |
33 | theoretical shot volume | 理论的注射容量 | |
34 | thin wall stock | 料位过薄/砸穿 | |
35 | thread ring;threaded cavity | 螺纹型环 | |
36 | toggle clamp | 快速夹 | |
37 | venting | 困气 | |
38 | vertical miller | 立式铣刀,立辊,立辊轧机 | |
39 | wall stock | 料位厚薄 | |
40 | waterflow regulator | 冷却水流量计 |