mandrel查询结果如下：
详解 词库
双语句典
英文释义
韦氏词典
英文百科
wiki词典
英文句库
名词 变体/同根词
(a)Technology for producing pyrolytically derived materials formed on a mould, mandrel or other substrate from precursor gases which decompose at temperatures from 1,300 °C to 2,900 °C and at pressures of 130 Pa to 20 kPa, including technology for the composition of precursor gases, flow-rates and process control schedules and parameters;
1 、在注模、芯模或其他基料上用母质气体在 1300 摄氏度到 2900 摄氏度高温范围内和 130 帕到 20 千帕的压力下分解而产生出热解衍生材料的生产技术，包括母质气体的合成、流量、工艺过程控制的规程以及参数控制的技术在内
属类：法学专业-中国法律-导弹及相关物项和技术出口管制条例
Determination on Amount of Interference between Mandrel and Roller Sleeve of Variable Crown Roller
VC轧辊心轴与辊套过盈量的确定
属类：行业术语-中文论文标题-
Fatigue Fracture and Life Analysis for W6Mo5Cr4V2 Bearing Ring Cold-Rolling Mandrel
W6Mo5Cr4V2钢轴承环冷轧芯辊的疲劳断裂与寿命分析
属类：行业术语-中文论文标题-
Experimental Study on Role of Mandrel in thin-walled Tube NC Bending Process with Small Bending Radius
薄壁管小弯曲半径数控绕弯成形芯模效用的实验研究
属类：行业术语-中文论文标题-
Finite Element Simulation and Analysis on Dissimilar Steel of Seamless Tube during Hot Continuous fully-floating Mandrel Rolling
不同钢种对全浮动芯棒钢管热连轧过程影响的模拟分析
属类：行业术语-中文论文标题-
Open end blind rivets with break pull mandrel and countersunk head-AIA/AIA
敞口式沉头心轴盲铆钉.AIA/AIA
属类：行业标准名称-国际标准-BS EN ISO 15982-2002
Open end blind rivets with break pull mandrel and countersunk head-AIA/St
敞口式沉头心轴盲铆钉.AIA/St
属类：行业标准名称-国际标准-BS EN ISO 15978-2002
Open end blind rivets with break pull mandrel and countersunk head-A2/A2
敞口式沉头心轴盲铆钉.AZ/AZ
属类：行业标准名称-国际标准-BS EN ISO 15984-2002
Open end blind rivets with break pull mandrel and countersunk head-Cu/St or Cu/Br or Cu/SSt
敞口式沉头心轴盲铆钉.Cu/St or Cu/Br or Cu/SSt
属类：行业标准名称-国际标准-BS EN ISO 16583-2002
Open end blind rivets with break pull mandrel and countersunk head-St/St
敞口式沉头心轴盲铆钉.St/St
属类：行业标准名称-国际标准-BS EN ISO 15980-2002
Open end blind rivets with break pull mandrel and protruding head-AIA/AIA
敞口式盘头心轴盲铆钉.AIA/AIA
属类：行业标准名称-国际标准-BS EN ISO 15981-2002
Open end blind rivets with break pull mandrel and protruding head-AIA/St
敞口式盘头心轴盲铆钉.AIA/St
属类：行业标准名称-国际标准-BS EN ISO 15977-2002
Open end blind rivets with break pull mandrel and protruding head-A2/A2
敞口式盘头心轴盲铆钉.AZ/AZ
属类：行业标准名称-国际标准-BS EN ISO 15983-2002
Open end blind rivets with break pull mandrel and protruding head-Cu/St or Cu/Br or Cu/SSt
敞口式盘头心轴盲铆钉.Cu/St or Cu/Br or Cu/SSt
属类：行业标准名称-国际标准-BS EN ISO 16582-2002
Open end blind rivets with break pull mandrel and protruding head-NiCu/St or NiCu/SSt
敞口式盘头心轴盲铆钉.NiCu/St or NiCu/SSt
属类：行业标准名称-国际标准-BS EN ISO 16584-2002
Open end blind rivets with break pull mandrel and protruding head-St/St
敞口式盘头心轴盲铆钉.St/St
属类：行业标准名称-国际标准-BS EN ISO 15979-2002
After the mandrel is melted, a thin layer of alloy remains on the propellant surface
此心轴溶化之后，在推进剂表面上留有一薄层的合金。
属类：综合句库--
Closed end blind rivets with break pull mandrel and countersunk head-AlA/St
带断点牵引心轴和埋头的封口式空心单面压装铆钉.AlA/St
属类：行业标准名称-国际标准-DIN EN ISO 15974-2001
Closed and blind rivets with break pull mandrel and countersunk head-AIA/St.
带断点牵引心轴和埋头的密铆和沉头铆钉.AIA/St
属类：行业标准名称-国际标准-NF E25-711-2001
Closed end blind rivets with break pull mandrel and protruding head-AIA/St.
带断点牵引心轴和凸出头的密铆和沉头铆钉.AIA/St
属类：行业标准名称-国际标准-NF E25-710-2001
Closed end blind rivets with break pull mandrel and protruding head-AlA/St
带断点牵引心轴和突出头的封口式空心单面压装铆钉.AlA/St
属类：行业标准名称-国际标准-DIN EN ISO 15973-2001
Closed and blind rivets with break pull mandrel and countersunk head-AIA/St
带断裂拉伸心轴和埋头紧固件的封闭和沉头铆钉
属类：行业标准名称-国际标准-BS EN ISO 15974-2001
Closed and blind rivets with break pull mandrel and protruding head-AIA/St
带断裂拉伸心轴和突出头的封闭和沉头铆钉
属类：行业标准名称-国际标准-BS EN ISO 15973-2001
Open end blind rivets with break pull mandrel and countersunk head-A2/A2
带拉断铁心和埋头的开端盲铆钉A2/A2
属类：行业标准名称-国际标准-EN ISO 15984-2002
Open end blind rivets with break pull mandrel and countersunk head-AlA/AlA
带拉断铁心和埋头的开端盲铆钉AlA/AIA
属类：行业标准名称-国际标准-EN ISO 15982-2002
Open end blind rivets with break pull mandrel and countersunk head-AlA/St
带拉断铁心和埋头的开端盲铆钉AlA/St
属类：行业标准名称-国际标准-EN ISO 15978-2002
Open end blind rivets with break pull mandrel and countersunk head-Cu/St or Cu/Br or Cu/SSt
带拉断铁心和埋头的开端盲铆钉Cu/St 或 Cu/Br 或 Cu/SSt
属类：行业标准名称-国际标准-EN ISO 16583-2002
Open end blind rivets with break pull mandrel and countersunk head-St/St
带拉断铁心和埋头的开端盲铆钉St/St
属类：行业标准名称-国际标准-EN ISO 15980-2002
Closed end blind rivets with break pull mandrel and protruding head-Al/AlA
带拉断铁心和突头的封端盲铆钉AI/AIA
属类：行业标准名称-国际标准-EN ISO 15975-2002
Closed end blind rivets with break pull mandrel and protruding head-St/St
带拉断铁心和突头的封端盲铆钉St/St
属类：行业标准名称-国际标准-EN ISO 15976-2002
noun
1.A cylindrical rod round which metal or other material is forged or shaped.
‘The copper _mandrel_ also helps control the welding heat by acting as a heat-sink.’
‘The gooey tapes are plastered on the inside of molds or wrapped around shells called mandrels, and then baked.’
2.A miner’s pick.
3.A shaft or spindle in a lathe, to which work is fixed while being turned.
‘The drill is switched on and the _mandrel_ rotates.’
‘While the _mandrel_ is rotating, a layer of shrink-wrap tape is applied to the outside of the composite material.’
独上高台望四海 手揽云月傍天飞， 落叶重重已十月 归鸟凄凄啼心扉。
