exe or LILO has loaded the kernel into memory and passed control to it

exe或者LILO将核心载入内存并将控制传递给它。

The boot= line tells LILO where to install the boot loader.

boot=行告诉LILO在哪里安装引导加载程序。

LILO stores information regarding the location of the operating systems it can to load physically on the MBR.

LILO将关于可以引导的操作系统位置的信息物理上存储在MBR中。

LILO has no interactive command interface, whereas GRUB does.

LILO没有交互式命令界面，而GRUB拥有。

The LILO boot loader expanded the boot capabilities, but lacked any file system awareness.

LILO引导加载程序对引导能力进行了扩充，但是它却缺少文件系统的感知能力。

LILO halting at this point indicates the second stage boot loader could not be executed.

LILO在此处停止表示第二阶段引导加载程序不能被执行。

map= points to the map file used by LILO internally during bootup.

map=指向引导期间LILO内部使用的映射文件。

Press the Tab key to see a list of images to boot and the original terse LILO text prompt boot: .

按Tab键查看要引导的映像列表和原始简略LILO文本提示boot：。

The traditional LILO boot prompt was a very terse text prompt similar to what you see if you press the Tab key.

传统LILO引导提示符是一个非常简略的文本提示，类似于按Tab键所看到的内容。

This sector contains a program called loader (for Linux it is usually LILO or GRUB); this actually boots the operating system.

此扇区包含名为loader的程序（对于Linux，它通常是LILO或GRUB）；实际上是此程序引导操作系统。

The boot problem is hopefully now resolved and your normal LILO or GRUB options will get the system up and running

但愿现在已经解决了引导问题，并且可以使用正常的LILO或GRUB选项启动和运行系统。

For a hard drive, the MBR loads a stage 1 boot loader, which is typically either the LILO or GRUB stage1 boot loader on a Linux system.

对于硬盘驱动器，MBR加载一个阶段1启动加载程序，该程序通常是Linux系统上的LILO或GRUB阶段1启动加载程序。

Still using the example lilo . conf file as before, at this point you have two choices, which may not be immediately obvious to LILO newbies.

还是使用前面的示例lilo.conf文件，此时将有两个选择，可能对LILO新手来说并不直观。

That way, if I messed up any of the configuration in my lilo . conf file, I could take out the boot disk and boot into Linux as before.

那样，如果弄乱了lilo.conf文件中的任何配置，都可以取出引导磁盘并像先前一样引导到Linux。

If LILO stops here, there were problems loading the second stage boot loader.

如果LILO停止在这里，那么是在引导第二阶段引导加载程序时出现了问题。

If you’re determined to do things by hand, you need to run lilo , make ssh host keys, and set a root password.

如果您决定以手工方式引导系统，那么必须运行lilo，生成ssh主机密钥，然后设置root密码。

If you’re starting fresh, you can jump straight to the Configuring LILO section.

如果是要进行全新安装，那么直接跳转到配置LILO那一节。

Incorrectly entering the password will take you back to the LILO prompt.

如果输入的口令有误，则会返回LILO提示符。

Although LILO continues to be developed, the basic principles of how LILO works still remain the same.

虽然LILO仍在不断地发展，但LILO工作原理的基本概念保持不变。

Now let’s look at two of the more popular boot loaders: LILO and GRUB.

现在来看两个较为流行的引导加载程序：LILO和GRUB。

For further information on these and other lilo . conf parameters, refer to the manual pages (man lilo. conf).

要获得关于lilo.conf的这些以及其他参数的进一步资料，请参考手册页（manlilo.conf）。

To add a LILO entry for chain loading another partition, such as this GRUB partition, you can add an entry such as the one in Listing 4.

要添加一个LILO条目以链式加载另一个分区，比如这个GRUB分区，可以添加一个类似清单4的条目。

Instead of placing LILO in the new Linux logical partition superblock, it is placed in the master boot record.

用户没有将LILO放在新的Linux逻辑分区超级块中，而是放在主引导记录中。

Unlike LILO ’s configuration file, grub. conf is read at boot time, and the MBR does not need to be refreshed when this is changed.

与LILO的配置文件不同，grub.conf会在引导时被读取，当被修改时不必去更新MBR。

Akin to LILO or GRUB in a normal desktop system, this is the initial program that runs when the iPAQ starts and allows you to load Linux.

与通常的桌面系统中的LILO或GRUB类似，这是当iPAQ启动并允许您加载Linux时运行的初始程序。

The common problems at this stage are media problems or incorrect disk parameters specified in your lilo . conf file.

在这个阶段的常见问题是介质问题，或者在lilo.conf文件中指定了不正确的磁盘参数。

last in,last out (缩写:lilo)

后进后出(法)