Effect of La on High Temperature Oxidation Resistance of FeCrAl Alloy Foils

La对FeCrAl合金箔材抗高温氧化性能的影响

属类：行业术语-中文论文标题-

Preparation of Al-based Brazing Foils Used for Vacuum Brazing of LD2 Aluminium Alloy and Its Property Research

LD2铝合金真空钎焊用铝基钎料的制备及性能研究

属类：行业术语-中文论文标题-

Foils for packaging; laminated aluminium foils

包装用薄膜.多层铝薄膜

属类：行业标准名称-国际标准-DIN 55531-1988

Selection and Use of Neutron-Activation Foils for Determining Neutron Spectra Employed in Radiation-Hardness Testing of Electronics

电子辐射强度试验中用测定中子波谱的中子激活箔的选择和应用

属类：行业标准名称-国际标准-ASTM E 720-1994

Harmonized system of quality assessment for electronic components-Sectional specification: Fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric

电子器件质量评定协调体系.分规范:直流电流用有薄层金属箔和一聚碳酸酯薄膜电介质电极的固定电容器.

属类：行业标准名称-国际标准-BS EN 131700-1998

Harmonized system of quality assessment for electronic components-Blank detail specification: fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielect

电子器件质量评定协调体系.空白详细规范:直流电流用有薄层金属箔和一聚碳酸酯薄膜电介质电极的固定电容器

属类：行业标准名称-国际标准-BS EN 131701-1998

The development of transmission electron microscopes has made it possible to examine internal details of very thin metal foils . X-ray diffraction techniques are used to study phenomena related to the grouping of the atoms themselves. See also materials science, Henry C. Sorby.

电子显微镜技术的提高使观察超薄金属片的内部结构成为可能。X射线的衍射技术被用来研究同成组原子相关的现象。

属类：化学及生命科学-化学-

Tensile test without extensometer on foils and strips of aluminium and wrought aluminium alloys with a thickness up to 0,179 mm

对厚度在0.179mm以下的铝和铝塑性合金薄膜和带材进行不作微调拉伸测量的拉力试验

属类：行业标准名称-国际标准-DIN 50154-1980

The absorption of many molecular layers could be reestablished by rinsing the foils with tap water

多分子层的吸附作用可用自来水淋洗金属箔而重新实现。

属类：综合句库--

Sectional specification: Fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric;

分规范.带薄金属膜电极和聚碳酸脂膜介质的直流电用固定电容器

属类：行业标准名称-国际标准-DIN EN 131700-1998

Materials for interconnection structures. Part 5 : sectional specification set for conductive foils and films with or without coatings. Section 4 : conductive inks.

互连结构用材料.第5部分:有或无涂覆的导电箔和膜的分规范组.第4节:导电油墨

属类：行业标准名称-国际标准-NF C93-784-1997

Application of Genetic Algorithms to Inverse Design of Two-Dimensional Foils

基因算法于二维翼形逆向设计之应用

属类：行业术语-中文论文标题-

Blank detail specification-Fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric-Assessment level E;

空白详细规范.直流电用带金属箔电极和聚碳酸脂薄膜介质的固定电容器

属类：行业标准名称-国际标准-DIN EN 131701-1998

Blank detail specification-Fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric-Assessment level EZ;

空白详细规范.直流电用带金属箔电极和聚碳酸脂薄膜介质的固定电容器.评定等级EZ

属类：行业标准名称-国际标准-DIN EN 131702-1998

Materials for interconnection structures. Part 5 : sectional specification set for conductive foils and films with and without coatings. Section 1 : copper foils (for the manufacture of copper-clad base materials).

连接结构用材料.第5部分:带和不带涂层的导电箔和薄膜的分规范.第1节:铜箔(用于生产铜涂覆基材)

属类：行业标准名称-国际标准-NF C93-781-1996

Materials for interconnection structures-Part 5: Sectional specification set for conductive foils and films with or without coatings; section 4: Conductive inks (IEC 61249-5-4:1996);

连接结构用材料.第5部分:带或不带涂层的导电箔和薄膜的分规范.第4节:导电油墨

属类：行业标准名称-国际标准-DIN EN 61249-5-4-1997

Effects of Sulfate Anions on Pitting Behavior of aluminium Foils during AC Etching

硫酸根对铝箔交流电蚀孔蚀行为之影响

属类：行业术语-中文论文标题-

Microstructure Control of aluminium Sheets for Foils

铝箔生产中铝箔毛料的组织控制

属类：行业术语-中文论文标题-

Effect of Grain Size and Texture on the Capacitance of Etched Aluminunl Foils

铝箔之晶粒大小和集合组织对电蚀性质的影响

属类：行业术语-中文论文标题-

ALUMINIUM AND ALUMINIUM ALLOYS. FOILS . PHYSICAL TESTS.

铝和铝合金.薄带钢和金属薄片.物理试验、铝带多孔性、可湿性、厚度.铝带附着力

属类：行业标准名称-国际标准-NF A50-261-1977

ALUMINIUM AND ALUMINIUM ALLOYS. FOILS . MECHANICAL TESTS.

铝和铝合金.薄带和箔金属薄片.机械试验.拉力、冲压、崩裂

属类：行业标准名称-国际标准-NF A50-181-1970

ALUMINIUM AND ALUMINIUM ALLOYS. FOILS . PART 4 : SPECIAL PROPERTY REQUIREMENTS. (EUROPEAN STANDARD EN 546-4).

铝和铝合金.薄金属片.第4部分:特性要求

属类：行业标准名称-国际标准-NF A50-443-1997

Materials for interconnection structures-Sectional specification set for conductive foils and films with and without coatings-Conductive inks

内部连接结构用材料.有或无涂层的导电箔和导电薄膜分规范.导电墨水

属类：行业标准名称-国际标准-BS EN 61249-5-4-1997

Influencing Factors on Etching Rates of Iron Nickel Alloy Foils in Ferric Chloride Solution

三氯化铁溶液中影响铁镍合金蚀刻速率的因素

属类：行业术语-中文论文标题-

Pigment foil: Coloured foils used for blocking.

色箔:作烫印用的彩色箔。

属类：行业术语-印刷-

decalcomania ,backed with metal leaf (excl. stamping and blocking foils )

贴花纸,衬有金属薄片(不包括模压和压印箔)

属类：物品名称-文体用品-

Study on the Rapidly Solidified Cu-Ni-Sn-P Brazing Foils of Cupro Braze Technology

铜硬钎焊CuNiSnP箔带钎料的研制

属类：行业术语-中文论文标题-

Effect of Annealing Technique and Speed Ratio on Micro-orientation in Cross Shear Rolled High Purity aluminium Foils

退火工艺与速比对异步轧制高纯铝箔微取向的影响

属类：行业术语-中文论文标题-

Effect of Microstructures in Electrolytic Capacitor Al Foils on Specific Capacitance

微观组织对电解电容器铝箔比电容的影响

属类：行业术语-中文论文标题-

ZINC AND ZINC ALLOYS. METHOD FOR THE VICKERS HARDNESS TESTING ON FOILS AND COILS.

锌和锌合金.铸制品与轧制品的硬度试验

属类：行业标准名称-国际标准-NF A03-820-1981