Environmental testing. Part 2 : tests. Test Xa and guidance : immersion in cleaning solvents.

环境试验.第2部分:试验.Xa试验和导则:清洁溶剂浸设试验

属类：行业标准名称-国际标准-NF C20-745-1993

Safety of household and similar electrical appliances. Part 2 : particular requirements for portable immersion heaters.

家用和类似电器的安全.第874部分:便携的浸入式加热器的特别要求

属类：行业标准名称-国际标准-NF C73-874-1996

Safety of household and similar electrical appliances. Part 2 : particular requirements for fixed immersion heaters.

家用和类似用途电器的安全.第2部分:固定浸入式加热器的特殊要求

属类：行业标准名称-国际标准-NF C73-873-1997

Hygrothermal performance of building materials and products-Determination of water absorption coefficient by partial immersion

建筑材料和产品的温湿性能.部分浸入法测定吸水系数

属类：行业标准名称-ISO标准-

Fibre building boards; Hard and medium boards; Determination of water absorption and of swelling in thickness after immersion in water

建筑用纤维板 硬质和中质板:浸水后吸水性和厚度膨胀的测定

属类：行业标准名称-ISO标准-

Metallic coatings-Galvanization by immersion in molten zinc (hot-dip galvanizing)-Adhesion test methods.

金属镀层.热浸镀锌.粘结强度试验法

属类：行业标准名称-国际标准-NF A91-124-2002

Metallic powders--Determination of effective density--Liquid immersion method

金属粉末有效密度的测定液体浸透法

属类：行业标准名称-国家标准名-GB/T5161-1985

Corrosion of metals and alloys-Alternate immersion test in salt solution

金属与合金的腐蚀 盐溶液中的交替浸入试验

属类：行业标准名称-ISO标准-

electric immersion heater for attachment to tank vats or similar vessels

浸入式电加热器,装在水箱、水槽或类似容器上

属类：物品名称-日用品-电器

immersion heater incorporated in a tank or vat (excl. those for water heating or domestic use)

浸入式加热器,装在箱内或容器内(不包括热水器或家用加热器)

属类：物品名称-机械设备-

Determination of immersion --Immersion speed method

浸润性的测定浸透速度法

属类：行业标准名称-劳动安全技术-

Water immersion size test: Test using water immersion to establish the effectiveness of sizing in a paper as a water repellent.

浸水法测试施胶度:用浸水法确定施胶对抗水的在效程度的测试。

属类：行业术语-印刷-

Immersion suits-Part 1: Constant wear suits, requirements including safety

浸渍服装.第1部分:耐磨服装,包括安全的要求

属类：行业标准名称-ISO标准-

Immersion suits-Part 2: Abandonment suits, requirements including safety

浸渍服装.第2部分:废弃的服装,包括安全要求

属类：行业标准名称-ISO标准-

Immersion suits-Part 3: Test methods

浸渍服装.第3部分:试验方法

属类：行业标准名称-ISO标准-

This can be eliminated by placing the model in an immersion cell

可将模型置于浸没液槽中,以消除此种误差。

属类：综合句库--

diffusion treatment, relies upon an immersion or spray treatment

扩散处理法依靠常压浸注或喷雾处理。

属类：综合句库--

Cold applied joint sealants-Part 4 : test method for the determination of the change in mass and volume after immersion in test fuel.

冷用接缝密封胶.第4部分:浸入到试验燃料后质量和体积变化测定的试验方法

属类：行业标准名称-国际标准-NF P98-897-4-2003

Cold applied joint sealants-Part 6 : test method for the determination of the adhesion/cohesion properties after immersion in chemical liquids.

冷用密封胶.第6部分:浸入到化学液后粘着性/凝聚性测定的试验方法

属类：行业标准名称-国际标准-NF P98-897-6-2003

Aluminium and aluminium alloys. Anodizing. Part 6 : assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution without prior acid treatment.

铝和铝合金.阳极化.第6部分:通过对未预先进行酸处理的浸入到磷酸/铬酸溶液中的质量损失的测量对密封阳极氧

属类：行业标准名称-国际标准-NF A91-455-6-1999

Anodizing of aluminium and its alloys. Assessment of sealing quality by measurement of the loss of mass after immersion in acid solution.

铝和铝合金的阳极处理.(阳极氧化).通过测量在酸溶液浸泡后重量的损失来进行积砂的检验

属类：行业标准名称-国际标准-NF A91-407-1981

Anodizing of aluminium and its alloys; Assessment of quality of sealed anodic oxide coatings by measurement of the loss of mass after immersion in phosphoric-chromic acid solution

铝和铝合金的阳极氧化 磷-铬酸法评定阳极氧化膜的封孔质量

属类：行业标准名称-ISO标准-

Aluminium and aluminium alloys-Anodizing-Part 7 : assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solut

铝及铝合金.阳极氧化.第7部分:测量经过磷酸和铬酸溶液酸处理浸渍后的质量损失来评定密封阳极氧化覆层的质量

属类：行业标准名称-国际标准-NF A91-455-7-2002

Anodizing of aluminium and its alloys--Assessment of quality of sealed anodic oxide coatings by measurement of the loss of mass after immersion in phosphoric-chromic acid solution

铝及铝合金阳极氧化阳极氧化膜的封孔质量评定磷-铬酸法

属类：行业标准名称-国家标准名-GB/T14952.1-1994

Anodizing of aluminium and its alloys--Assessment of sealing quality by measurement of the loss of mass after immersion in acid solution

铝及铝合金阳极氧化阳极氧化膜的封孔质量评定酸浸法

属类：行业标准名称-国家标准名-GB/T14952.2-1994

The Good Life: Some happy people are low on pleasure, but high on "absorption and immersion ," meaning they take great pleasure in the things that they do

美好的生活:有些人不要求有很高的享受,但他们非常"专注、投入",从自己所从事的事情中获得很大乐趣。

属类：综合句库--

Doors. Test of the lower part of the door leaf by immersion in cold water.

门.门扇下部冷水浸泡试验

属类：行业标准名称-国际标准-NF P20-522-1983

Wood-based panels-Determination of swelling in thickness after immersion in water

木质板材.浸水后厚度膨胀的测定

属类：行业标准名称-ISO标准-

Wood-based panels-Determination of wet bending strength after immersion in water at 70℃ or 100℃ (boiling temperature)

木质板材.浸在70度或100度(沸水温度)后测量湿抗弯强度

属类：行业标准名称-ISO标准-

Magnetic contactors with immersion thermostats-120V control circuit with built in transformer. Elements are thermostatically controlled in 54KW (max)increments.

配置浸泡式温控器的磁控继电器--内置变压器的120伏控制电路。加热棒可通过温控器进行控制,其感应变化增量最大为54千瓦。

属类：产品说明书-洁具说明-