Decorative laminated sheets based on thermosetting resins--Determination of dimensions of test pieces

热固性树脂装饰层压板试件尺寸的规定

属类：行业标准名称-国家标准名-GB/T7911.2-1987

Decorative laminated sheets based on thermosetting resins--Determination of reaction to fire

热固性树脂装饰层压板滞燃性能的测定

属类：行业标准名称-国家标准名-GB/T7911.6-1987

Biaxially oriented polypropylene laminated polyethylene(BOPP/LDPE)films and pouches

双向拉伸聚丙烯(BOPP)/低密度聚乙烯(LDPE)复合膜、袋

属类：行业标准名称-国家标准名-GB/T10005-1998

The rotating slip ring is insulated from the shaft by a laminated plastic bushing

旋转滑环是用片状塑料衬套与轴绝缘的。

属类：综合句库--

felt of wool or fine animal hair,in the piece or cut to length (excl. floor coverings and that for use in machinery or plant),not impregnated,coated,covered,laminated or embroidered

羊毛或动物细毛毡,成幅或剪裁成一定长度(不包括地板覆盖物及机器和工厂使用的毛毡),未浸渍、涂层、包覆、压层或绣花

属类：物品名称-纺织产品-

Specification for industrial rigid laminated sheets based on thermosetting resins for electrical purposes. Part 1 : definitions, designations and general requirements.

以热固性树脂为基的电工用工业刚性层压板规范.第1部分:定义、标记和一般要求

属类：行业标准名称-国际标准-NF C26-181-1994

Because nowadays there are many further uses to which this laminated cardboard made of wood fibres can be put

因为这种用木头制成的薄板制品,如今有很多再利用的方法。

属类：综合句库--

Base materials for printed circuits-Part 2 : specifications-Specification No. 10 : epoxide non-woven/woven glass reinforced copper-clad laminated sheet of defined flammability (vertical burning te

印制电路的基本材料.第2部分:规范.第10号规范.确定了可燃性(垂直燃烧试验)环氧非织物玻璃增强铜涂覆层片

属类：行业标准名称-国际标准-NF C93-760/A1-2001

Base materials for printed circuits-Part 2 : specifications-Specification No 11 : thin epoxide woven glass fabric copper-clad laminated sheet, general purpose grade, for use in the fabrication of

印制电路的基本材料.第2部分:规范.第10号规范.用于多层印制板生产中使用的一般用途级别的薄环氧织物玻璃纤

属类：行业标准名称-国际标准-NF C93-761/A1-2001

Base materials for printed circuits-Part 2 : specifications-Specification no 6 : phenolic cellulose paper copper-clad laminated sheet of defined flammability (horizontal burning test).

印制电路的基本材料.第2部分:规范.第5号规范.确定了可燃性(水平燃烧试验)酚醛纤维素铜涂覆层片

属类：行业标准名称-国际标准-NF C93-756/A1-2001

Base materials for printed circuits-Part 2 : specifications-Specification no 7 : phenolic cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test).

印制电路的基本材料.第2部分:规范.第7号规范.确定了可燃性(垂直燃烧试验)酚醛纤维素铜涂覆层片

属类：行业标准名称-国际标准-NF C93-757/A1-2001

Base materials for printed circuits-Part 2 : specifications-Specification no 9 : epoxide cellulose paper core, epoxyde glass cloth surfaces copper-clad laminated sheet of defined flammability (ver

印制电路的基本材料.第2部分:规范.第9号规范.确定了可燃性(垂直燃烧试验)环氧纤维素纸芯环氧玻璃布表面铜涂

属类：行业标准名称-国际标准-NF C93-759/A1-2001

Base materials for printed circuits-Part 2 : specifications-Specification n o 1 : phenolic cellulose paper copper-clad laminated sheet high electrical quality.

印制电路的基材.第2部分:规范.1号规范.高电气性能的铜包覆片层状酚醛纤维素纸

属类：行业标准名称-国际标准-NF C93-749/A1-2001

Base materials for printed circuits-Part 2-12 : specifications : thin epoxyde woven glass fabric copper-clad laminated sheet of defined flammability, for use in the fabrication of multilayer printed

印制电路用基材.第2-12部分:规范.多层电路板制作用规定易燃性的薄铜涂覆环氧树脂层压玻璃布板

属类：行业标准名称-国际标准-NF C93-762/A1-2001

Base materials for printed circuits. Part 2 : specifications. Specification number 10 : epoxide non-woven/woven glass reinforced copper-clad laminated sheet of defined flammability (vertical burning test).

印制电路用基材.第2部分:规范.第10号规范:规定易燃性的环氧化合物非编织或编织玻璃纤维增强覆铜层压板(垂直

属类：行业标准名称-国际标准-NF C93-760-1996

Base materials for printed circuits. Part 2 : specifications. Specification no 11 : thin epoxide woven glass fabric copper-clad laminated sheet, general purpose grade, for use in the fabrication of multilayer printed boards.

印制电路用基材.第2部分:规范.第11号规范:多层印制电路板制作用普通级薄环氧化合物编织的玻璃纤维覆铜层压

属类：行业标准名称-国际标准-NF C93-761-1996

Base materials for printed circuits. Part 2 : specifications. Specification no 12 : thin epoxide woven glass fabric copper-clad laminated sheet of defined flammability, for use in the fabrication of multilayer printed boards.

印制电路用基材.第2部分:规范.第12号规范:多层印制电路板制作用规定易燃性的薄环氧化合物编织玻璃纤维织物

属类：行业标准名称-国际标准-NF C93-762-1996

Base materials for printed circuits-Part 2 : specification-Specifications number 14 : phenolic cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test), economic

印制电路用基材.第2部分:规范.第14号规范:规定易燃性的酚醛纤维素纸镀铜层压板(垂直燃烧试验)

属类：行业标准名称-国际标准-NF C93-764/A1-2001

Base materials for printed circuits. Part 2 : specifications. Specification number 14 : phenolic cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test), economic quality.

印制电路用基材.第2部分:规范.第14号规范:经济质量的规定易燃性的酚醛纤维素纸覆铜层压板(垂直燃烧试验)

属类：行业标准名称-国际标准-NF C93-764-1996

Base materials for printed circuits. Part 2 : specifications. Specification number 16 : polyimide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test).

印制电路用基材.第2部分:规范.第16号规范:规定易燃性的聚酰亚胺玻璃纤维织物覆铜层压板(垂直燃烧试验)

属类：行业标准名称-国际标准-NF C93-766-1994

Base materials for printed circuits. Part 2 : specifications-Specification number 18 : bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of defined flammability (

印制电路用基材.第2部分:规范.第18号规范.规定易燃性的带双马来酰亚胺三嗪的铜涂覆改良性环氧化物层压玻璃

属类：行业标准名称-国际标准-NF C93-768/A2-2001

Base materials for printed circuits. Part 2 : specifications. Specification no 4 : epoxide woven glass fabric copper-clad laminated sheet, general purpose grade.

印制电路用基材.第2部分:规范.第4号规范:普通级的环氧化合物编织的玻璃纤维覆铜层压板

属类：行业标准名称-国际标准-NF C93-754-1996

Base materials for printed circuits. Part 2 : specifications. Specification no 7 : phenolic cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test).

印制电路用基材.第2部分:规范.第7号规范:规定易燃性的酚醛纤维素纸覆铜层压板(垂直燃烧试验)

属类：行业标准名称-国际标准-NF C93-757-1996

Base materials for printed circuits. Part 2 : specifications. Specification number 9 : epoxide cellulose paper core, epoxyde glass cloth surfaces copper-clad laminated sheet of defined flammability (vertical burning test).

印制电路用基材.第2部分:规范.第9号规范:规定易燃性的环氧化合物纤维素纸芯、环氧化合物玻璃布表面覆铜层压

属类：行业标准名称-国际标准-NF C93-759-1996

Polyimide woven glass fabric copper-clad laminated sheet of defined flammability for printed circuits

印制电路用限定燃烧性的覆铜箔聚酰亚胺玻璃布层压板

属类：行业标准名称-国家标准名-GB/T16315-1996