Material Selection and Comparison of E15 Heat Exchanger 's Inner Tube in High Pressure Polythene Set

高压聚乙烯装置E15换热器内管材料的选用和比较

属类：行业术语-中文论文标题-

Numerical Analysis of Heat Transfer Enhancement of Fin-tube Heat Exchanger with Vortex Generatoring Resulting from the Variation of Angle of Attack

攻击角对涡产生器式管片换热器换热影响的数值分析

属类：行业术语-中文论文标题-

Measurement and Analysis of Plate Heat Exchanger Gaskets in Heating Plant

供热站板式换热器密封垫片检测与分析

属类：行业术语-中文论文标题-

Overhaul of Fixed Tubeplate Heat Exchanger Expansion Joint

固定管板换热器膨胀节的修复

属类：行业术语-中文论文标题-

fixed tube sheet heat exchanger

固定管板式(列管)换热器

属类：综合句库-英汉综合-

Ion-exchange, as the name partially suggests, is the process of exchanging ions from a liquid with ions from an exchanger .

顾名思义,离子交换指的是溶液中的离子与交换剂上的离子相互交换。

属类：化学及生命科学-化工-化工原理与技术

Numerical Simulation on Heat Transfer Performance of Shell-and-tube Heat Exchanger

管壳式换热器换热性能的数值模拟研究

属类：行业术语-中文论文标题-

The Comparison of Two Turbulence Models in Simulation of Heat Exchanger

管壳式换热器数值模拟的流动模型比较

属类：行业术语-中文论文标题-

Effect on Fluxion and Heat Transfer Due to the Thickness of Soft Dirt in Shell Sewage Heat Exchanger

管壳式污水换热器结垢厚度对流动换热的影响

属类：行业术语-中文论文标题-

Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes

锅炉、过热器和换热器用无缝铁素体和奥氏体合金钢管的标准规范

属类：行业标准名称-国际标准-ASTM A 213/A 213M-2001

Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger , and Condenser Tubes

焊接奥氏体钢锅炉、过热器、换热器和冷凝器标准规范

属类：行业标准名称-国际标准-ASTM A 249/A 249M-2001

Welded Copper and Copper-Alloy Heat Exchanger Tube

焊接的铜及铜合金热交换管

属类：行业标准名称-国际标准-ASTM B 543-1996

Welded Copper and Copper-Alloy Heat Exchanger Tube (Metric

焊接的铜及铜合金热交换管(米制)

属类：行业标准名称-国际标准-ASTM B 543M-1991

simulation of Plate-fin Structure of Heat Exchanger and Modification of Strength Rules

换热器板翅结构数值模拟及强度设计准则修正

属类：行业术语-中文论文标题-

Development of CAD System of Heat Exchanger Parts

换热器常用零部件CAD系统的开发与应用

属类：行业术语-中文论文标题-

Stress Corrosion Failure Analysis of the Fastening Bolt at Heat Exchanger

换热器紧固螺栓的应力腐蚀断裂分析

属类：行业术语-中文论文标题-

Optimized Design Research Based on U-tube Heat Exchanger

基于U形管式换热器的优化设计研究

属类：行业术语-中文论文标题-

contact heat mass exchanger ;contact type acetylene generator

接触式热质交换器

属类：综合句库--

Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes with Integral Fins

具有整体散热叶片的冷凝器及热交换器用铜及铜合金无缝管

属类：行业标准名称-国际标准-ASTM B 359-1998

Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes with Integral Fins (Metric

具有整体散热叶片的冷凝器及热交换器用无缝铜和铜合金管(米制)

属类：行业标准名称-国际标准-ASTM B 359M-1995

open-type heat exchanger

开口式热交换器

属类：综合句库-英汉综合-

heat-exchanger of iron or steel for air heaters or hot-air distributors

空气加热器或热风分配器热交换器,钢或铁制

属类：物品名称-机械设备-

The Design of Industrial Ethernet Exchanger Used in Coal Mine

矿用工业以太网交换机的设计

属类：行业术语-中文论文标题-

Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes

冷凝和热交换管用的无缝镍和镍合金规范

属类：行业标准名称-国际标准-ANSI/ASTM B 163-2001

The cooling section is the third heat exchanger of the system and is designed to use a cooling medium to reduce the product to the desired temperature, typically near the temperature at which it will be packaged and stored.

冷却段为设备中第三个热交换器,用冷却介质将产品降到要求的特别接近包装和储存的温度。

属类：工程技术-食品工程-

Technical regulation for design of refinery steel double-pipe exchanger

炼油厂钢制套管换热器设计技术规定

属类：行业标准名称-技术规范-工程建设

Inquiring into Spiral Coil Twin-tube Quench Heat Exchanger and Examination-Repairing Technical Problems

螺旋缠绕双联管深冷换热器及其检修技术

属类：行业术语-中文论文标题-

TEMA (= Tubular Exchanger Manufacturers Association, U.S.A.)

美国管式交换器制造商协会

属类：综合句库--

Heat Exchanger Designing for Motorcycle Catalytic Converter Performance Experiment

摩托车催化器性能考核台架试验中换热器的研究

属类：行业术语-中文论文标题-

Extremely reactive, it is used as a chemical reagent and raw material, in metallurgy, as a heat exchanger (in nuclear power generators and certain types of engines), and in sodium-vapour lamps (see electric discharge lamp).

钠的化学性质活泼,被作为化学反应物和原料,在冶金学中则作为热交换介质(用于nuclear power发动机和某些引擎中)和钠蒸气灯。

属类：化学及生命科学-化学-