The plate heat exchanger is divided into three sections, with the middle section serving as the regeneration component of the pasteurization ystems

片式热交换器分三段,中间段作为巴氏杀菌设备的回流段

属类：工程技术-食品工程-

gas-to-gas heat exchanger

燃气-燃气热交换器

属类：综合句库-英汉综合-

Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater, Heat Exchanger and Condenser Applications

热交换和冷凝用的锅炉,超级加热炉熔焊,碳和碳锰钢管规范

属类：行业标准名称-国际标准-ANSI/ASTM A 1020-2001

Heat exchangers-Guidelines to prepare installation, operating and maintenance instructions required to maintain the performance of each type of heat exchanger ;

热交换器.保持所有各种结构热交换器功率用安装和运行指南以及维修说明的制定用导引

属类：行业标准名称-国际标准-DIN EN 307-1998

Heat exchangers-Guidelines for preparing installation, operating and maintenance instructions required to maintain the performance of each type of heat exchanger

热交换器.制定各种类型热交换器运转性能的安装,操作,和维护要求细则

属类：行业标准名称-国际标准-BS EN 307-1999

Heat exchanger : Any of several devices that transfer heat from a hot to a cold fluid.

热交换器:亦称换热器。一种将热从热流体传递到冷流体的一些装置。

属类：化学及生命科学-化学-

UNS No. C26000 Brass Strip in Narrow Widths and Light Gage for Heat-Exchanger Tubing

热交换器管用窄而薄的UNS No. C26000黄铜带材

属类：行业标准名称-国际标准-ASTM B 569-1998

Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes

热交换器和冷凝器用无缝冷拉低碳钢管

属类：行业标准名称-国际标准-ASTM A 179/A 179M-1990

U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes

热交换器及冷凝器用U型无缝铜和铜合金管

属类：行业标准名称-国际标准-ASTM B 395-1995

U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes (Metric

热交换器及冷凝器用U型无缝铜和铜合金管(米制)

属类：行业标准名称-国际标准-ASTM B 395M-1995

Research Progress on Copper Alloys with High Anticorrosion as Heat Exchanger

热交换器用高耐蚀铜合金的研究进展

属类：行业术语-中文论文标题-

Brass tube in heat exchanger --Ammonia test for residual stress resistance

热交换器用黄铜管内应力氨熏检验方法

属类：行业标准名称-国家标准名-GB/T8000-1987

Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes

热交换器与冷凝器用电阻焊接碳素钢管

属类：行业标准名称-国际标准-ASTM A 214/A 214M-1996

Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes

热交换器与冷凝器用电阻焊接碳素钢管规范

属类：行业标准名称-国际标准-ANSI/ASTM A 214-1996

Artificial heart-lung machine--Heat exchanger

人工心肺机热交换器

属类：行业标准名称-医疗器械-

Any indirect type of heat exchanger can be utilized to accomplish the desired result.

任何一种间接热交换器均能达到预期结果。

属类：工程技术-食品工程-

serpentine type heat exchanger

蛇管式换热器

属类：综合句库--

Development of Airside Characteristics Study of Fin-and-tube Heat Exchanger in Wet Conditions

湿工况下翅片管换热器空气侧特性研究进展

属类：行业术语-中文论文标题-

Code for design of exchanger and vessel foundation in petrochemical enterprises

石油化工企业冷换设备和容器基础设计规范

属类：行业标准名称-技术规范-工程建设

Condensing Experimental Study of Heat Transfer Characteristics of Finned in Line Tube Bank Heat Exchanger Surface with Punched Vortex Generators

顺排圆管涡产生器式强化传热板芯凝结实验研究

属类：行业术语-中文论文标题-

They will cake on the walls of the heat exchanger , from which they could be removed easily during periodic shutdowns

它们将粘着在热交换器的壁上,因此在定期停机时很容易把它们刮取下来。

属类：综合句库--

Normally, this final stage of heating is accomplished after the product temperature has been raised to a significant level using a plate heat exchanger or similar heat exchange system.

通常,将产品用片式热交换器或相似的热交换设备升到很高温度以后,加热阶段才完成。

属类：工程技术-食品工程-

After passing through the timing pump, the product flows through a second heat exchanger where it is brought to the predetermined and desired temperature.

通过调速泵以后,产品流入第二个热交换器。在这,产品达到预定的温度。

属类：工程技术-食品工程-

To measure the average local heat transfer coefficients, the test section was of counter-flow double-tube type of heat exchanger with refrigerant flowing inside the inner tube while 10% ethanol water flowing outside.

为获取平均局部换热系数,实验管段为套管式逆流换热器结构,制冷剂在内管内冷凝,而10%的乙醇溶液在管间流动。

属类：化学及生命科学-化工-制冷论文

In Situ Electromagnetic (Eddy-Current)Examination of Nonmagnetic Heat Exchanger Tubes

无磁热交换管的现场电磁(涡电流)检验

属类：行业标准名称-国际标准-ASTM E 690-1998

The preheating zone is prolonged by the non-oxidizing zone; the heat exchange between flue gas and strip is intensified to reduce flue gas temperature. A heat exchanger is mounted in flue to preheat air. The air excess rate is reduced to less than 0.95 to secure the atmosphere non-oxidizing.

无氧化段延长了预热区,加强废气和带钢之间的热交换,降低废气排出温度,利用设置在废气通道内的换热器,来预热该段所使用的助燃空风。为保证无氧化气氛,空气过剩系数降低到0.95以下。

属类：工程技术-冶金-

To design an optimum shell and tube heat exchanger , there are many variables including pressure, diameter, length and baffle spacing, resulting in a very complex problem.

要设计一个最佳化的管壳式换热器,包含许多变量,如压力、直径、长度和折流板间距,结果使问题非常复杂。

属类：化学及生命科学-化工-化工原理与技术

Numerical Simulation of Dynamic Response for Primary Surface Heat Exchanger

一次表面热交换器动态特性的数值模拟

属类：行业术语-中文论文标题-

Synthesis of Heat Exchanger Networks with a stage-wise Superstructure Model

一种分级超结构换热器网络综合优化方法及其应用

属类：行业术语-中文论文标题-

Balanced Fluid Exchange by Volume Homeostatic Fluid-Fluid Exchanger -A New Solution to Postvitrectomy Vitreous Hemorrhage

以体积恒定液体交换仪进行平衡液体交换术-处理玻璃体切除术后再出血的新方法

属类：行业术语-中文论文标题-